Fabrication and luminescent properties of Eu(BMPPA)3BPy complex and its functionalized silica nanocomposites

Luminescent silica nanocomposites functionalized with a Eu-complex have been prepared and characterized.The europium complex is composed of 2,2'-bipyridyl(BPy) and 2-(4-bromomethyI)-phenylpropionic acid(BMPPA),which contains highly active benzyl bromide substituents and can covalently bind with poly(4-vinylpyridine)(P4VP)-modified silica nanoparticles(nanoSiO_2P4VP) to form nanoSiO_2P4VPEuBPy composites.Microscopic images revealed that the nanoSiO_2P4VPEuBPy composites easily formed aggregates,due to an inter-particle binding caused by the benzyl bromide among the composites.The as-prepared nanocomposites showed the typical emissions of Eu(III) ions at the wavelengths from 580 nm to 750 nm designated to the ~5D_0→~7F_n transitions.Time-resolved fluorescence decay measurements revealed that the emission lifetime was approximately 0.204 ms and 0.576 ms for the nanoSiO_2EuBPy composites,a little shorter than that in the Eu(BMPPA)_3BPy complex.     

Characteristics of black carbon aerosol in Jiaxing,China during autumn 2013

We conducted measurements of black carbon（BC） aerosol in Jiaxing,China during autumn from September 26 to November 30,2013.We investigated temporal and diurnal variations of BC,and its correlations with meteorological parameters and other major pollutants.Results showed that hourly mass concentrations of BC ranged from 0.2 to 22.0 μg/m³,with an average of 5.1 μg/m³.The diurnai variation of BC exhibited a bimodal distribution,with peaks at 07:00 and 18:00.The morning peak was larger than the evening peak.The mass percentages of BC in PM_2.5 and PM₁₀ were 7.1%and 4.8%,respectively.The absorption coefficient of BC was calculated to be 44.4 Mm^-1,which accounted for 11.1%of the total aerosol extinction.BC was mainly emitted from local sources in southwestern Jiaxing where BC concentrations were generally greater than 11 μg/m³ during the measurement period.Correlation analysis indicated that the main sources of BC were motor vehicle exhaust,and domestic and industrial combustion.     

In-situ SiN combined with etch-stop barrier structure for high-frequency AlGaN/GaN HEMT

The etch-stop structure including the in-situ SiN and AlGaN/GaN barrier is proposed for high frequency applications.The etch-stop process is realized by placing an in-situ SiN layer on the top of the thin AlGaN barrier.F-based etching can be self-terminated after removing SiN,leaving the AlGaN barrier in the gate region.With this in-situ SiN and thin barrier etch-stop structure,the short channel effect can be suppressed,meanwhile achieving highly precisely controlled and low damage etching process.The device shows a maximum drain current of 1022 mA/mm,a peak transconductance of 459 mS/mm,and a maximum oscillation frequency(fmax)of 248 GHz.     

X-ray diffraction and Raman spectra of merrillite at high pressures

ABSTRACT

The compressibility and effect of pressure on the vibrations of merrillite, Ca₉NaMg(PO₄)₇, were studied by using diamond anvil cell at room temperature combined with in-situ synchrotron X-ray diffraction and Raman spectroscopy up to about 18 and 15?GPa, respectively. The pressure-volume data was fitted by a third-order Birch–Murnaghan equation of state to determine the isothermal bulk modulus as K₀ ?=?87.2(32) GPa with pressure derivative K₀′?=?3.2(4). If K₀′?=?4, the isothermal bulk modulus was obtained as 81.6(10) GPa. The axial compressibility was estimated and an axial elastic anisotropy exists since a-axis is less compressible than the c-axis. The Raman frequencies of all observed modes for merrillite continuously increase with pressure, and the pressure dependences of stretching modes (v ₃ and v ₁) are larger than those of the bending modes (v ₄ and v ₂) and external modes. The isothermal mode Grüneisen parameters and intrinsic anharmonicity of merrillite were also calculated.     

基于四波混频过程和线性分束器产生四组份纠缠

多组份纠缠是量子信息处理的重要资源,它的产生通常涉及到许多复杂的线性和非线性过程.本文从理论上提出了一种利用两个独立的四波混频过程和线性分束器产生真正的四组份纠缠的方案,其中,线性分束器的作用是将两个独立的四波混频过程联系起来.首先应用部分转置正定判据研究了强度增益对四组份纠缠的影响,结果表明,在整个增益区域内都存在真正的四组份纠缠,并且随着强度增益的增加,纠缠也在增强.然后研究了线性分束器的透射率对四组份纠缠的影响,发现只要线性分束器的透射率不为0或1,该系统也可以产生真正的四组份纠缠.最后,通过研究该系统可能存在的三组份纠缠和两组份纠缠来揭示该系统的纠缠结构.本文理论结果为实验上利用原子系综四波混频过程产生真正的四组份纠缠提供了可靠的方案.     

Monitoring the Thiol/Thiophenol Molecule-Modulated Plasmon-Mediated Silver Oxidation with Dark-Field Optical Microscopy

Surface plasmon can trigger or accelerate many photochemical reactions, especially useful in energy and environmental industries. Recently, molecular adsorption has proven effective in modulating plasmon-mediated photochemistry, however the realized chemical reactions are limited and the underlying mechanism is still unclear. Herein, by using in situ dark-field optical microscopy, the plasmon-mediated oxidative etching of silver nanoparticles (Ag NPs), a typical hot-hole-driven reaction, is monitored continuously and quantitatively. The presence of thiol or thiophenol molecules is found essential in the silver oxidation. In addition, the rate of silver oxidation is modulated by the choice of different thiol or thiophenol molecules. Compared with the molecules having electron donating groups, the ones having electron accepting groups accelerate the silver oxidation dramatically. The thiol/thiophenol modulation is attributed to the modulation of the charge separation between the Ag NPs and the adsorbed thiol or thiophenol molecules. This work demonstrates the great potential of molecular adsorption in modulating the plasmon-mediated photochemistry, which will pave a new way for developing highly efficient plasmonic photocatalysts.     

Biomass-derived dibasic acids to diesters with inorganic ligand-supported catalyst: synthesis,optimization, characterization

Research on Chemical Intermediates - Several attempts have been made to obtain aliphatic dicarboxylic diesters from esterification reaction to develop the biomass-derived platform molecules and...     

Systematic Modulation of Thiol Functionalities in Inexpensive Porous Polymers for Effective Mercury Removal

Through accumulation, mercury contamination in aquatic systems still poses serious health risks despite the strict regulations on drinking water and industrial discharge. One effective strategy against this is adsorptive removal, in which a suitably functionalized porous material is added to water treatment protocols. Thiol (SH) group-grafted structures perform commendably; however, insufficient attention is paid to the cost, scalability, and reusability or how the arrangement of sulfur atoms could affect the Hg^II binding strength. We used an inexpensive and scalable porous covalent organic polymer (COP-130) to systematically introduce thiol functional groups with precise chain lengths and sulfur content. Thiol-functionalized COP-130 demonstrates enhanced wettability and excellent Hg^II uptake of up to 936 mg g⁻¹, with fast kinetics and exceptionally high selectivity. These Hg adsorbents are easily regenerated with HCl and can be used at least six times without loss of capacity even after treatment with strong acid, a rare performance in the domain of Hg-removal research.     

甲基环己烷在9∽15.5 eV能量区的真空紫外光电离研究

利用具有同步辐射源的反射式飞行时间质谱仪，研究甲基环己烷的真空紫外光电离和光解离. 观测到母体离子C₇H₁₄⁺和碎片离子C₇H₁₃⁺，C₆H₁₁⁺，C₆H₁₀⁺，C₅H₁₀⁺，C₅H₉⁺，C₄H₈⁺，C₄H₇⁺和C₃H₅⁺的光电离效率曲线. 测定甲基环己烷的电离能为9.80±0.03 eV，通过光电离效率曲线确定其碎片离子的出现势. 在B3LYP/6-31G(d)水平上对过渡态、中间体和产物离子的优化结构进行表征，并使用G3B3方法计算其能量. 提出主要碎片离子的形成通道. 分子内氢迁移和碳开环是甲基环己烷裂解途径中最重要的过程.